Mikrotik Power Supply check

This check monitors the power supply on a Mikrotik router to help prevent hardware failure and maintain performance.

Basic check information

  • Supported Systems/Application: SNMP-enabled devices that support the MIKROTIK-MIB

  • Device Class: SNMP - Router

Troubleshooting

  • Failed: Verify that the SNMP community string is correctly configured in Network Discovery.
  • 201 Exception OID_TYPE_NOSUCHOBJECT: The device is missing the required OID metric.

SNMP properties queried

  • Power supply state: mtxrHlPowerSupplyState (OID: 1.3.6.1.4.1.14988.1.1.3.15)
  • Backup power supply state: mtxrHlBackupPowerSupplyState (OID: 1.3.6.1.4.1.14988.1.1.3.16)
  • Voltage: mtxrHlVoltage (OID: 1.3.6.1.4.1.14988.1.1.3.8)
  • Wattage: mtxrHlPower (OID: 1.3.6.1.4.1.14988.1.1.3.12)
  • Current: mtxrHlCurrent (OID: 1.3.6.1.4.1.14988.1.1.3.13)

Calculations performed

  • Power supply state: Power supply state from mtxrHlPowerSupplyState:
    • Pass = 1
    • Fail = less than 0 or greater than or equal to 2
  • Backup power supply state: Backup power supply from mtxrHlBackupPowerSupplyState:
    • Pass = 1
    • Fail = less than 0 or greater than or equal to 2
  • Voltage: Voltage from mtxrHlVoltage:
    • Pass = 240–250 V
    • Fail = less than 240 V or greater than 250 V
  • Wattage: Wattage from mtxrHlPower:
    • Pass = 230–240 W
    • Fail = less than 230 W or greater than 240 W
  • Current (AMPs): Current from mtxrHlCurrent:
    • Pass = 960–970 A
    • Fail = less than 960 A or greater than 970 A