System SNMP Checks
This section lists the system SNMP Checks available for the following vendors: 3Ware/LSI, Adaptec, APC, Buffalo Technology Limited, Cisco, Cyberoam Security Appliances, Dell, Eaton, Fortinet, Fujitsu Siemens, HP JetDirect, HP/Compaq, Intel, Linux Monitoring, LSI, Mylex, NetApps. Netgear, QNAP, SonicWALL, Synology, WatchGuard Technologies in addition to some more generic OIDs.
Notes
If the SNMP Check contains an octet string as the pass condition it will only pass where an exact match for the string is returned, including case. Where any other string is returned, including those that indicate the monitored element is performing with the expected parameters, this will cause the check to fail. For example where the pass condition is Good the check will fail if Normal is returned.
Although the SNMP Checks were confirmed against a range of hardware, the results of the Checks are dependent upon the configuration and supported features of the monitored device or product.
Vendor |
Product |
Description |
Operator |
Pass Condition |
---|---|---|---|---|
3Ware|LSI |
||||
RAID |
Battery Backup Unit Status |
= |
1 (ready) |
|
RAID |
RAID 1 Unit Status |
= |
0 (OK) |
|
RAID |
RAID 2 Unit Status |
= |
0 (OK) |
|
RAID |
RAID 3 Unit Status |
= |
0 (OK) |
|
RAID |
RAID 4 Unit Status |
= |
0 (OK) |
|
RAID |
RAID Drive 1 Status |
= |
255 |
|
RAID |
RAID Drive 2 Status |
= |
255 |
|
RAID |
RAID Drive 3 Status |
= |
255 |
|
RAID |
RAID Drive 4 Status |
= |
255 |
|
RAID |
RAID Drive 5 Status |
= |
255 |
|
RAID |
RAID Drive 6 Status |
= |
255 |
|
RAID |
RAID Drive 7 Status |
= |
255 |
|
RAID |
RAID Drive 8 Status |
= |
255 |
|
Adaptec |
||||
RAID |
Adaptec Storage Device Status |
= |
3 |
|
RAID |
Array 1 Health |
= |
3 (optimal) |
|
RAID |
Array 1 Status |
= |
3 (okay) |
|
RAID |
Array 2 Health |
= |
3 |
|
RAID |
Array 2 Status |
= |
3 (okay) |
|
RAID |
Array 3 Health |
= |
3 (optimal) |
|
RAID |
Array 3 Status |
= |
3 |
|
RAID |
Array 4 Health |
= |
3 |
|
RAID |
Array 4 Status |
> |
3 (okay) |
|
RAID |
Logical Status Disk 1 |
= |
3 (okay) |
|
RAID |
Logical Status Disk 2 |
= |
3 (okay) |
|
RAID |
Logical Status Disk 3 |
= |
3 (okay) |
|
RAID |
Logical Status Disk 4 |
= |
3 (okay) |
|
RAID |
Logical Status Disk 5 |
= |
3 (okay) |
|
RAID |
Logical Status Disk 6 |
= |
3 (okay) |
|
RAID |
Operational status of this controller |
= |
3 (okay) |
|
RAID |
Overall operational status |
= |
3 (okay) |
|
RAID |
S.M.A.R.T. Status Disk 1 |
= |
4 (okay) |
|
RAID |
S.M.A.R.T. Status Disk 2 |
= |
4 (okay) |
|
RAID |
S.M.A.R.T. Status Disk 3 |
= |
4 (okay) |
|
RAID |
S.M.A.R.T. Status Disk 4 |
= |
4 (okay) |
|
RAID |
S.M.A.R.T. Status Disk 5 |
= |
4 |
|
RAID |
S.M.A.R.T. Status Disk 6 |
= |
4 (okay) |
|
RAID |
Status of battery for this controller |
= |
5 (okay) |
|
APC |
||||
UPS |
Battery Replacement Date |
>= |
0 |
|
UPS |
Battery Replacement Indicator |
= |
1 |
|
UPS |
Battery runtime remaining |
> |
90000 |
|
UPS |
Battery Status |
= |
2 |
|
UPS |
Current internal UPS temperature - Celsius |
< |
38 |
|
UPS |
Current state for the whole system (UPS and surrounding breakers) |
= |
2 (onLine) |
|
UPS |
Current state of UPS |
- |
2 (online) |
|
UPS |
Current UPS Load (%) |
< |
90 |
|
UPS |
High Ambient Temperature Warning - Celsius |
< |
38 |
|
UPS |
Model |
= |
0 |
|
UPS |
Remaining battery capacity - Percent |
> |
10 |
|
UPS |
Test Diagnostic Date |
> |
0 |
|
UPS |
Test Diagnostic Results |
= |
1 (ok) |
|
UPS |
UPS Load |
< |
85 |
|
Buffalo Technology Limited |
||||
TeraStation |
Backup 1 status |
< |
4 (finished_and_failed) |
|
TeraStation |
Backup 2 status |
< |
4 (finished_and_failed) |
|
TeraStation |
Backup 3 status |
< |
4 (finished_and_failed) |
|
TeraStation |
Backup 4 status |
< |
4 (finished_and_failed) |
|
* |
TeraStation |
RAID Array 1 - Used Space % |
< |
90 |
* |
TeraStation |
RAID Array 2 - Used Space % |
< |
90 |
* |
TeraStation |
RAID Array 3 - Used Space % |
< |
90 |
* |
TeraStation |
RAID Array 4 - Used Space % |
< |
90 |
* |
TeraStation |
RAID Array 5 - Used Space % |
< |
90 |
* |
TeraStation |
RAID Array 6 - Used Space % |
< |
90 |
* Please Note: From BUFFALO-NAS-MIB: If the RAID array is not made, or the RAID array is not mounted then this displays -1 (1). |
||||
Cisco |
||||
PIX |
CPU utilization (1 minute) |
= |
0 |
|
PIX |
CPU utilization (5 minute) |
= |
0 |
|
PIX |
CPU utilization (5 second) |
= |
0 |
|
PIX |
Current connections in use |
= |
0 |
|
PIX |
Failover status |
= |
0 |
|
PIX |
Memory free |
= |
0 |
|
PIX |
Memory used |
= |
0 |
|
PIX |
Most connections in use |
= |
0 |
|
Cyberoam Security Appliances |
||||
UTM |
% CPU Usage |
< |
90 |
|
UTM |
% Disk usage |
< |
90 |
|
UTM |
% Main Memory Usage |
< |
90 |
|
UTM |
% Swap Usage |
< |
90 |
|
UTM |
Current High Availability Mode |
> |
0 |
|
UTM |
Current live connected users |
> |
0 |
|
UTM |
Current registrable expiry date |
< |
0 |
|
UTM |
Current registration status of Cyberoam appliance |
= |
1 |
|
UTM |
Current status of AntiSpam service |
= |
4 |
|
UTM |
Current status of AntiVirus service |
= |
4 |
|
UTM |
Current status of Apache service |
= |
4 |
|
UTM |
Current status of Database service |
= |
4 |
|
UTM |
Current status of DGD service |
= |
4 |
|
UTM |
Current status of DNS service |
= |
4 |
|
UTM |
Current status of drouting service |
= |
4 |
|
UTM |
Current status of FTP service |
= |
4 |
|
UTM |
Current status of Garner service |
= |
4 |
|
UTM |
Current status of HA service |
= |
4 |
|
UTM |
Current status of IDP service |
= |
4 |
|
UTM |
Current status of IMAP4 service |
= |
4 |
|
UTM |
Current status of Network service |
= |
4 |
|
UTM |
Current status of NTP service |
= |
4 |
|
UTM |
Current status of POP3 service |
= |
4 |
|
UTM |
Current status of SMTP service |
= |
4 |
|
UTM |
Current status of SSHD service |
= |
4 |
|
UTM |
Current status of SSLVPN service |
= |
4 |
|
UTM |
Current status of Tomcat service |
= |
4 |
|
UTM |
Current subscription status for AntiSpam module |
< |
3 |
|
UTM |
Current subscription status for AntiVirus module |
< |
3 |
|
UTM |
Current subscription status for Cyberoam support |
= |
1 |
|
UTM |
Current subscription status for IDP module |
< |
3 |
|
UTM |
Current subscription status for Web and Application Filter module |
< |
3 |
|
UTM |
Disk capacity in MB |
> |
0 |
|
UTM |
Memory capacity in MB |
> |
0 |
|
UTM |
Subscription Expiry date for AntiSpam module, if subscribed |
< |
0 |
|
UTM |
Subscription Expiry date for AntiVirus module, if subscribed |
< |
0 |
|
UTM |
Subscription Expiry date for Cyberoam Support, if subscribed |
< |
0 |
|
UTM |
Subscription Expiry date for IDP module, if subscribed |
< |
0 |
|
UTM |
Subscription Expiry date for Web and Application Filter module, if subscribed |
< |
0 |
|
UTM |
Swap Capacity in MB |
> |
0 |
|
UTM |
Total FTP hits |
> |
0 |
|
UTM |
Total HTTP hits |
> |
0 |
|
UTM |
Total IMAP hits |
> |
0 |
|
UTM |
Total POP3 hits |
> |
0 |
|
UTM |
Total SMTP hits |
> |
0 |
|
Dell |
||||
Battery State |
State of battery |
= |
1 (ready) |
|
Chassis Status |
Defines the status of the chassis |
= |
3 (ok) |
|
Controller State |
Condition of the controller's subsystem |
= |
3 (online) |
|
drs Global System Status |
Overall chassis status being monitored |
= |
3 (ok) |
|
Fans |
Status of cooling devices combined |
= |
3 |
|
iDRAC |
Global Storage Status |
= |
3 (ok) |
|
iDRAC |
Global System Status |
= |
3 (ok) |
|
Intrusion Status |
Reading of all intrusion detection devices |
= |
3 |
|
Memory Status |
Status of all memory devices |
= |
3 |
|
Motherboard Temperature |
Motherboard temperature probe reading |
< |
350 |
|
Power Supply |
Status of all power supplies |
= |
3 |
|
PowerConnect |
Fan 1 Status |
= |
1 (normal) |
|
PowerConnect |
Fan 2 Status |
= |
1 (normal) |
|
PowerConnect |
Fan 3 Status |
= |
1 (normal) |
|
PowerConnect |
Global Status |
= |
3 (ok) |
|
PowerConnect |
Power Supply State (AC) |
= |
1 (normal) |
|
PowerConnect |
Power Supply State (DC) |
= |
1 (normal) |
|
powerConnect 4 |
Global operation state of the switch |
= |
3 (ok) |
|
Processor Temperature |
Processor temperature probe reading |
< |
350 |
|
RAID |
Array Manager |
= |
1 |
|
RAID |
Storage Management |
= |
3 |
|
RAID Physical Disk 1 State |
Current condition of Disk 1 |
= |
3 (online) |
|
RAID Physical Disk 10 State |
Current condition of Disk 10 |
= |
3 (online) |
|
RAID Physical Disk 2 State |
Current condition of Disk 2 |
= |
3 (online) |
|
RAID Physical Disk 3 State |
Current condition of Disk 3 |
= |
3 (online) |
|
RAID Physical Disk 4 State |
Current condition of Disk 4 |
= |
3 (online) |
|
RAID Physical Disk 5 State |
Current condition of Disk 5 |
= |
3 (online) |
|
RAID Physical Disk 6 State |
Current condition of Disk 6 |
= |
3 (online) |
|
RAID Physical Disk 7 State |
Current condition of Disk 7 |
= |
3 (online) |
|
RAID Physical Disk 8 State |
Current condition of Disk 8 |
= |
3 (online) |
|
RAID Physical Disk 9 State |
Current condition of Disk 9 |
= |
3 (online) |
|
RAID Virtual Disk 1 State |
Current condition of virtual disk 1 |
= |
1 |
|
RAID Virtual Disk 10 State |
Current condition of virtual disk 10 |
= |
1 |
|
RAID Virtual Disk 2 State |
Current condition of virtual disk 2 |
= |
1 |
|
RAID Virtual Disk 3 State |
Current condition of virtual disk 3 |
= |
1 |
|
RAID Virtual Disk 4 State |
Current condition of virtual disk 4 |
= |
1 |
|
RAID Virtual Disk 5 State |
Current condition of virtual disk 5 |
= |
1 |
|
RAID Virtual Disk 6 State |
Current condition of virtual disk 6 |
= |
1 |
|
RAID Virtual Disk 7 State |
Current condition of virtual disk 7 |
= |
1 |
|
RAID Virtual Disk 8 State |
Current condition of virtual disk 8 |
= |
1 |
|
RAID Virtual Disk 9 State |
Current condition of virtual disk 9 |
= |
1 |
|
Storage Management |
Global Health |
= |
3 (normal) |
|
System State Chassis Status |
Defines the system status of this chassis |
= |
3 (ok) |
|
System State Global System Status |
Defines the global system status of all chassis being monitored by this instrumentation instance. |
= |
3 (ok) |
|
System State Processor Device Status Combined |
Defines the combined status of all processor devices of this chassis. |
= |
3 (ok) |
|
Temperature Status |
Status of all temperature probes |
= |
3 |
|
Voltage Status |
Status of all voltage probes |
= |
3 |
|
Eaton |
||||
MGE UPS |
Battery charge level (%) |
> |
25 |
|
MGE UPS |
Battery fault indicator |
= |
2 |
|
MGE UPS |
Overload indicator |
= |
2 (yes) |
|
MGE UPS |
UPS internal failure |
= |
2 (no) |
|
MGE UPS |
UPS is on battery |
= |
2 (no) |
|
PowerWare UPS |
Advanced Battery Management Status |
= |
1 (batteryCharging) |
|
PowerWare UPS |
Battery Time Remaining |
> |
600 |
|
PowerWare UPS |
Output Load (%) |
< |
60 |
|
PowerWare UPS |
UPS Battery test status |
= |
2 (passed) |
|
Fortinet |
||||
FortiGate |
CPU Usage (%) |
< |
90 |
|
FortiGate |
Memory Usage (%) |
< |
90 |
|
FortiGate |
Number of sessions |
<= |
1000 |
|
FortiGate |
Total current session count |
<> |
0 |
|
FortiMail |
Log Disk Usage (%) |
< |
90 |
|
FortiMail |
Mail Disk Usage (%) |
< |
90 |
|
Fujitsu Siemens |
||||
RAID |
Controller status |
= |
1 (ok) |
|
RAID |
Logical drive status |
= |
1 (ok) |
|
RAID |
Overall status |
= |
1 (ok) |
|
RAID |
Physical Device status |
= |
1 (ok) |
|
RAID |
RAID 1 - Overall controller status |
= |
1 (ok) |
|
RAID |
RAID 1 - Status of onboard battery backup unit |
= |
3 (normal) |
|
RAID |
RAID 1 - Status of onboard battery backup unit (deprecated) |
= |
2 |
|
Server Control |
CPU 1 temperature sensor status |
= |
3 (ok) |
|
Server Control |
CPU 2 temperature sensor status |
= |
3 |
|
Server Control |
Power Supply Status |
= |
2 (ok) |
|
Server Control |
Status of the CPU temperature sensor |
= |
3 (ok) |
|
Server Control |
Status system fan 0 |
= |
3 (ok) |
|
Server Control |
Status system fan 1 |
= |
3 (ok) |
|
Server Control |
Status system fan 2 |
= |
3 (ok) |
|
Server Control |
Status system fan 3 |
= |
3 (ok) |
|
Server Control |
Status system fan 4 |
= |
3 (ok) |
|
Server Control |
Status system fan 5 |
= |
3 (ok) |
|
ServerControl2 |
CPU Status |
= |
1 (ok) |
|
ServerControl2 |
CPU Temperature - Celsius |
< |
35 |
|
ServerControl2 |
Fans Status |
= |
1 (ok) |
|
ServerControl2 |
Memory Status |
= |
1 (ok) |
|
ServerControl2 |
Power supply status (PSU01) |
= |
3 (ok) |
|
ServerControl2 |
Power supply status (PSU02) |
= |
3 (ok) |
|
ServerControl2 |
Temperature Status |
= |
1 (ok) |
|
ServerControl2 |
Voltage Status |
= |
1 (ok) |
|
Serverview |
Environment Status |
= |
1 (ok) |
|
Serverview |
MassStorage Status |
= |
1 (ok) |
|
Serverview |
Overall status of this system |
= |
1 |
|
Serverview |
Power Status |
= |
1 (ok) |
|
Serverview |
SystemBoard Status |
= |
1 |
|
Generic |
||||
UPS |
Battery Temperature (Celsius) |
< |
29 |
|
UPS |
Estimated Charge Remaining (%) |
> |
10 |
|
UPS |
Estimated Minutes Remaining |
> |
15 |
|
UPS |
Output Source |
= |
3 (normal) |
|
UPS |
Present number of active alarm conditions |
= |
0 (No_alarms) |
|
UPS |
Seconds On Battery |
= |
0 (Not on battery) |
|
HP |
||||
LeftHand - StoreVirtual |
Battery Backup Unit State |
= |
1 |
|
LeftHand - StoreVirtual |
Battery Backup Unit Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Cluster Active Managers Count |
<> |
0 |
|
LeftHand - StoreVirtual |
Cluster Module RAID Configuration |
<> |
0 |
|
LeftHand - StoreVirtual |
Cluster Module Storage State |
= |
1 |
|
LeftHand - StoreVirtual |
Cluster Server Count |
<> |
0 |
|
LeftHand - StoreVirtual |
Cluster Volume 1 Used (Percent) |
< |
90 |
|
LeftHand - StoreVirtual |
Cluster Volume 1 Used - Percentage of cluster space |
< |
75 |
|
LeftHand - StoreVirtual |
Cluster Volume 2 Used (Percent) |
< |
90 |
|
LeftHand - StoreVirtual |
Cluster Volume 2 Used - Percentage of cluster space |
< |
75 |
|
LeftHand - StoreVirtual |
Cluster Volume 3 Used (Percent) |
< |
90 |
|
LeftHand - StoreVirtual |
Cluster Volume 3 Used - Percentage of cluster space |
< |
75 |
|
LeftHand - StoreVirtual |
Cluster Volume 4 Used (Percent) |
< |
90 |
|
LeftHand - StoreVirtual |
Cluster Volume 4 Used - Percentage of cluster space |
< |
75 |
|
LeftHand - StoreVirtual |
Cluster Volume 5 Used (Percent) |
< |
90 |
|
LeftHand - StoreVirtual |
Cluster Volume 5 Used - Percentage of cluster space |
< |
75 |
|
LeftHand - StoreVirtual |
Disk 1 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 1 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 1 State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 10 Smart Health State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 10 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 10 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 2 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 2 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 2 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 3 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 3 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 3 State |
= |
pass |
|
LeftHand - StoreVirtual |
Disk 4 Smart Health State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 4 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 4 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 5 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 5 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 5 State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 6 Smart Health State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 6 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 6 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 7 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 7 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 7 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 8 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 8 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 8 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Disk 9 Smart Health State |
= |
1 |
|
LeftHand - StoreVirtual |
Disk 9 Smart Health Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Disk 9 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Fan 1 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Fan 2 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Fan 3 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Fan 4 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Fan Count |
>= |
1 |
|
LeftHand - StoreVirtual |
Power Supply 1 State |
= |
1 |
|
LeftHand - StoreVirtual |
Power Supply 1 Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Power Supply 2 State |
= |
1 |
|
LeftHand - StoreVirtual |
Power Supply 2 Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Power Supply Count |
>= |
1 |
|
LeftHand - StoreVirtual |
RAID 1 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
RAID 2 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
RAID 3 State |
= |
1 |
|
LeftHand - StoreVirtual |
RAID 4 State |
= |
1 |
|
LeftHand - StoreVirtual |
RAID Controller 1 Cache State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
RAID Controller 2 Cache State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
RAID State |
= |
1 |
|
LeftHand - StoreVirtual |
RAID Status Message |
= |
Normal |
|
LeftHand - StoreVirtual |
Temperature Sensor 1 State |
= |
1 |
|
LeftHand - StoreVirtual |
Temperature Sensor 2 State |
= |
1 |
|
LeftHand - StoreVirtual |
Temperature Sensor 3 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Temperature Sensor 4 State |
= |
1 (pass) |
|
LeftHand - StoreVirtual |
Temperature Sensor Count |
>= |
1 |
|
HP JetDirect |
||||
Printer |
Display status line |
= |
0 |
|
Printer |
Incoming data too slow |
= |
0 |
|
Printer |
Jam |
= |
0 |
|
Printer |
Manual intervention required |
= |
0 |
|
Printer |
Not enough memory |
= |
0 |
|
Printer |
Online/Offline status |
= |
0 |
|
Printer |
Out of paper |
= |
0 |
|
Printer |
Paper format error |
= |
0 |
|
Printer |
Paper output tray full |
= |
0 |
|
Printer |
Peripheral error |
= |
0 |
|
Printer |
Printer open |
= |
0 |
|
Printer |
Toner Low/Problem |
= |
0 |
|
HP/Compaq |
||||
CPU Fans |
Status of the processor fan(s) in the system |
= |
2 |
|
ECC Memory Errors |
Number of correctable memory errors that have occurred |
= |
0 |
|
Power Supply |
Overall condition of the fault tolerant power supply sub-system |
= |
2 |
|
RAID |
Compaq Intelligent Drive Array Management Status |
= |
2 |
|
RAID |
Overall intelligent drive array health |
= |
2 |
|
Server |
Overall status of the server health |
= |
2 |
|
System Fans |
Status of the fan(s) in the system |
= |
2 |
|
System Temperature |
Overall condition of the system's thermal environment |
= |
2 |
|
Intel |
||||
Multi-Flex Server |
Battery 1 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 1 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 2 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 2 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 3 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 3 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 4 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 4 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 5 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 5 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 6 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 6 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 7 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 7 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Battery 8 Remaining Capacity in Percentage |
<= |
75 |
|
Multi-Flex Server |
Battery 8 Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Drive 1 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 1 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 1 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 1 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 2 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 2 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 2 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 2 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 3 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 3 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 3 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 3 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 4 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 4 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 4 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 4 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 5 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 5 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 5 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 5 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 6 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 6 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 6 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 6 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 7 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 7 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 7 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 7 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Drive 8 Total Number of Errors |
= |
0 |
|
Multi-Flex Server |
Drive 8 Total Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Drive 8 Total Number of Read Errors |
= |
0 |
|
Multi-Flex Server |
Drive 8 Total Number of Write Errors |
= |
0 |
|
Multi-Flex Server |
Fan 1 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 1 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 2 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 2 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 3 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 3 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 4 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 4 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 5 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 5 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 6 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 6 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 7 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 7 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Fan 8 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Fan 8 RPM reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 1 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 1 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 1 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 1 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 2 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 2 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 2 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 2 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 3 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 3 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 3 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 3 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 4 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 4 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 4 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 4 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 5 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 5 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 5 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 5 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 6 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 6 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 6 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 6 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 7 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 7 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 7 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 7 status |
<= |
12 |
|
Multi-Flex Server |
Power supply 8 EMB Temperature in degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply 8 Fan RPM Reading |
>= |
1000 |
|
Multi-Flex Server |
Power supply 8 Hotspot Temperature in degrees Celsius |
>= |
40 |
|
Multi-Flex Server |
Power supply 8 status |
<= |
12 |
|
Multi-Flex Server |
Power supply Fan 1 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 2 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 3 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 4 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 5 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 6 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 7 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Power supply Fan 8 FRU Inlet Temperature in Degrees Celsius |
< |
40 |
|
Multi-Flex Server |
Storage Controller 1 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 1 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 1 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 1 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 1 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 1 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 2 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 2 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 2 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 2 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 2 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 3 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 3 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 3 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 3 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 3 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 4 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 4 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 4 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 4 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 4 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 5 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 5 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 5 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 5 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 5 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 6 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 6 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 6 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 6 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 6 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 7 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 7 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 7 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 7 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 7 Write Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 8 Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 8 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Physical Drives Missing |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Physical Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Read Errors |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Rervertible Global Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 8 Rervertible Global Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Revertive Dedicated Spares Present |
>= |
1 |
|
Multi-Flex Server |
Storage Controller 8 Revertive Dedicated Spares Used |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Virtual Drives Critical |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Virtual Drives Offline |
= |
0 |
|
Multi-Flex Server |
Storage Controller 8 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 1 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 1 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 1 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 1 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 2 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 2 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 2 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 2 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 3 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 3 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 3 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 3 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 4 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 4 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 4 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 4 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 5 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 5 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 5 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 5 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 6 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 6 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 6 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 6 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 7 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 7 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 7 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 7 Write Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 8 Number of Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 8 Number of non-RW Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 8 Read Errors |
= |
0 |
|
Multi-Flex Server |
Virtual Drive 8 Write Errors |
= |
0 |
|
Serverboard |
Baseboard Temperature |
= |
3 (ok) |
|
Serverboard |
Chassis Security State |
= |
3 (ok) |
|
Serverboard |
Chassis Status |
= |
3 (ok) |
|
Serverboard |
Chassis Thermal State |
= |
3 (ok) |
|
Serverboard |
Control Panel Temperature |
= |
0 |
|
Serverboard |
CPU 1 Status |
= |
3 (ok) |
|
Serverboard |
CPU 1 Temperature |
= |
3 (ok) |
|
Serverboard |
CPU 2 Status |
= |
3 (ok) |
|
Serverboard |
CPU 2 Temperature |
= |
3 (ok) |
|
Serverboard |
HSBP temperature |
= |
3 (ok) |
|
Serverboard |
Overall System Health Status |
= |
3 (ok) |
|
Serverboard |
Physical Memory Array Status |
= |
3 (ok) |
|
Serverboard |
Power Unit Status |
= |
3 (ok) |
|
Serverboard |
PSU 1 Status |
= |
3 (ok) |
|
Serverboard |
PSU 2 Status |
= |
3 (ok) |
|
Serverboard |
System Fan 1 Status |
= |
3 (ok) |
|
Serverboard |
System Fan 2 Status |
= |
3 (ok) |
|
Serverboard |
System Fan 3 Status |
= |
3 (ok) |
|
Serverboard |
System Fan 4 Status |
= |
3 (ok) |
|
Linux Monitoring |
||||
Net-SNMP |
1 minute Load (laLoad.1) |
<= |
4 |
|
Net-SNMP |
15 minute Load (laLoad.3) |
<= |
4 |
|
Net-SNMP |
5 minute Load (laLoad.2) |
<= |
4 |
|
Net-SNMP |
Available Real/Physical Memory Space on the host (memAvailReal) in kB |
> |
100000 |
|
Net-SNMP |
Available Swap Space on the host (memAvailSwap) in kB |
> |
100000 |
|
Net-SNMP |
Number of processes for PROC 1 |
< |
200 |
|
Net-SNMP |
Number of processes for PROC 2 |
< |
200 |
|
Net-SNMP |
Number of processes for PROC 3 |
< |
200 |
|
Net-SNMP |
Number of processes for PROC 4 |
< |
200 |
|
Net-SNMP |
Number of processes for PROC 5 |
< |
200 |
|
Net-SNMP |
Number of processes for PROC 6 |
< |
200 |
|
Net-SNMP |
Partition 1 use % (ns-disk-1-pct) |
<= |
90 |
|
Net-SNMP |
Partition 2 use % (ns-disk-2-pct) |
<= |
90 |
|
Net-SNMP |
Partition 3 use % (ns-disk-3-pct) |
<= |
90 |
|
Net-SNMP |
Partition 4 use % (ns-disk-4-pct) |
<= |
90 |
|
Net-SNMP |
Partition 5 use % (ns-disk-5-pct) |
<= |
90 |
|
Net-SNMP |
Partition 6 use % (ns-disk-6-pct) |
<= |
90 |
|
Net-SNMP |
Percentage of idle CPU time (ssCpuIdle) |
<= |
80 |
|
Net-SNMP |
Percentage of system CPU time (ssCpuSystem) |
<= |
50 |
|
Net-SNMP |
Percentage of user CPU time (ssCpuUser) |
<= |
50 |
|
Net-SNMP |
Process error flag for PROC 1 |
<> |
1 |
|
Net-SNMP |
Process error flag for PROC 2 |
<> |
1 |
|
Net-SNMP |
Process error flag for PROC 3 |
<> |
1 |
|
Net-SNMP |
Process error flag for PROC 4 |
<> |
1 |
|
Net-SNMP |
Process error flag for PROC 5 |
<> |
1 |
|
Net-SNMP |
Process error flag for PROC 6 |
<> |
1 |
|
Net-SNMP |
Total RAM Free (memTotalFree) in kB |
> |
200000 |
|
LSI |
||||
MegaRAID SAS |
Battery Replacement |
= |
0 (battery ok) |
|
MegaRAID SAS |
Enclosure Fault |
= |
0 |
|
MegaRAID SAS |
Physical Disk Fail Count (iMR Firmware) |
= |
0 |
|
MegaRAID SAS |
Physical Disk Fail Count (IR Firmware) |
= |
0 |
|
MegaRAID SAS |
Physical Disk PredFail Count (iMR Firmware) |
= |
0 |
|
MegaRAID SAS |
Physical Disk PredFail Count (IR Firmware) |
= |
0 |
|
MegaRAID SAS |
Status Physical Disk 0 |
= |
24 (online) |
|
MegaRAID SAS |
Status Physical Disk 1 |
= |
24 (online) |
|
MegaRAID SAS |
Status Physical Disk 2 |
= |
24 (online) |
|
MegaRAID SAS |
Status Physical Disk 3 |
= |
24 (online) |
|
MegaRAID SAS |
Status Physical Disk 4 |
= |
24 (online) |
|
MegaRAID SAS |
Status Physical Disk 5 |
= |
24 |
|
MegaRAID SAS |
Status Virtual Disk 0 |
= |
3 (optimal) |
|
MegaRAID SAS |
Status Virtual Disk 1 |
= |
3 (optimal) |
|
MegaRAID SAS |
Status Virtual Disk 2 |
= |
3 (ok) |
|
MegaRAID SAS |
Status Virtual Disk 3 |
= |
3 (optimal) |
|
MegaRAID SAS |
Status Virtual Disk 4 |
= |
3 |
|
MegaRAID SAS |
Status Virtual Disk 5 |
= |
3 (optimal) |
|
MegaRAID SAS |
Temperature Sensor Status |
= |
2 (ok) |
|
MegaRAID SAS |
Virtual Disk Degraded Count (iMR Firmware) |
= |
0 |
|
MegaRAID SAS |
Virtual Disk Degraded Count (IR Firmware) |
= |
0 |
|
MegaRAID SAS |
Virtual Disk Offline Count (iMR Firmware) |
= |
0 |
|
MegaRAID SAS |
Virtual Disk Offline Count (IR Firmware) |
= |
0 |
|
MIB-2 |
||||
Interface 1 Inbound Errors |
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
< |
1000 |
|
Interface 1 Outbound Errors |
The number of outbound packets that could not be transmitted because of errors. |
< |
1000 |
|
Interface 1 Status |
The current operational state of the interface. |
= |
1 |
|
System Uptime |
The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
< |
30000 |
|
TCP Established Connections |
The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. |
< |
2000 |
|
Misc |
||||
Device |
System Description |
= |
0 |
|
Device |
System Name |
= |
0 |
|
Device |
System Uptime |
>= |
0 |
|
Mylex |
||||
RAID |
Operational state of this controller |
= |
1 (Functional) |
|
NetApp |
||||
Autosupport |
Failed Sends since last reset |
>= |
0 |
|
Autosupport |
Last AutoSupport Send Status |
= |
1 |
|
Autosupport |
Successful Sends since last reset |
>= |
0 |
|
Clustered Failover |
Cannot Takeover Cause |
= |
1 (ok) |
|
Clustered Failover |
Configuration Settings |
= |
2 (enabled) |
|
Clustered Failover |
State = Dead |
> |
1 |
|
Clustered Failover |
Status returned by Partner |
= |
2 (ok) |
|
Fan |
Failed Fan Count |
< |
1 |
|
Fan |
Failed Fan Message |
= |
There are no failed fans. |
|
File System |
Most full File System - percentage used |
< |
90 |
|
File System |
Status Message |
= |
All volumes have adequate space. |
|
Information |
Machine Type |
<> |
0 |
|
Information |
Serial Number |
<> |
0 |
|
Interconnect |
Status |
= |
4 |
|
Power Supply |
Failed Power Supply Count |
< |
1 |
|
Power Supply |
Failed Power Supply Message |
= |
There are no failed power supplies. |
|
RAID |
Active Disk Count |
>= |
0 |
|
RAID |
Disk Failed Count |
< |
1 |
|
RAID |
Disk Failed Message |
= |
There are no failed disks. |
|
RAID |
Disk Spare Count |
>= |
0 |
|
RAID |
Status Disk 1 |
= |
1 (active) |
|
RAID |
Status Disk 10 |
= |
1 (active) |
|
RAID |
Status Disk 2 |
= |
1 (active) |
|
RAID |
Status Disk 3 |
= |
1 (active) |
|
RAID |
Status Disk 4 |
= |
1 (active) |
|
RAID |
Status Disk 5 |
= |
1 (active) |
|
RAID |
Status Disk 6 |
= |
1 (active) |
|
RAID |
Status Disk 7 |
= |
1 (active) |
|
RAID |
Status Disk 8 |
= |
1 (active) |
|
RAID |
Status Disk 9 |
= |
1 (active) |
|
RAID |
Total Disk Count |
>= |
0 |
|
RAID |
V Status Disk 1 |
= |
1 (active) |
|
RAID |
V Status Disk 10 |
= |
1 (active) |
|
RAID |
V Status Disk 2 |
= |
1 (active) |
|
RAID |
V Status Disk 3 |
= |
1 (active) |
|
RAID |
V Status Disk 4 |
= |
1 (active) |
|
RAID |
V Status Disk 5 |
= |
1 (active) |
|
RAID |
V Status Disk 6 |
= |
1 (active) |
|
RAID |
V Status Disk 7 |
= |
1 (active) |
|
RAID |
V Status Disk 8 |
= |
1 (active) |
|
RAID |
V Status Disk 9 |
= |
1 (active) |
|
Temperature |
Over Temperature |
= |
1 |
|
Netgear |
||||
ReadyNAS |
Disk 1 temperature |
< |
40 |
|
ReadyNAS |
Disk 2 temperature |
< |
40 |
|
ReadyNAS |
Disk 3 temperature |
< |
40 |
|
ReadyNAS |
Disk 4 temperature |
< |
40 |
|
ReadyNAS |
Disk 5 temperature |
< |
40 |
|
ReadyNAS |
Disk 6 temperature |
< |
40 |
|
ReadyNAS |
Disk 7 temperature |
< |
40 |
|
ReadyNAS |
Disk 8 temperature |
< |
40 |
|
ReadyNAS |
Fan 1 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 2 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 3 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 4 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 5 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 6 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 7 RPM |
>= |
1000 |
|
ReadyNAS |
Fan 8 RPM |
>= |
1000 |
|
ReadyNAS |
Temperature Probe 1 |
< |
40 |
|
ReadyNAS |
Temperature Probe 2 |
< |
40 |
|
ReadyNAS |
Temperature Probe 3 |
< |
40 |
|
ReadyNAS |
Temperature Probe 4 |
< |
40 |
|
ReadyNAS |
Temperature Probe 5 |
< |
40 |
|
ReadyNAS |
Temperature Probe 6 |
< |
40 |
|
ReadyNAS |
Temperature Probe 7 |
< |
40 |
|
ReadyNAS |
Temperature Probe 8 |
< |
40 |
|
ReadyNAS |
Volume 1 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 1 status |
<> |
2 |
|
ReadyNAS |
Volume 2 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 2 status |
<> |
2 |
|
ReadyNAS |
Volume 3 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 3 status |
<> |
2 |
|
ReadyNAS |
Volume 4 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 4 status |
<> |
2 |
|
ReadyNAS |
Volume 5 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 5 status |
<> |
2 |
|
ReadyNAS |
Volume 6 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 6 status |
<> |
2 |
|
ReadyNAS |
Volume 7 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 7 status |
<> |
2 |
|
ReadyNAS |
Volume 8 free space in megabytes |
> |
50 |
|
ReadyNAS |
Volume 8 status |
<> |
2 |
|
QNAP |
||||
NAS |
CPU Temperature |
< |
50 |
|
NAS |
HDD 1 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 1 Status |
= |
0 (ready) |
|
NAS |
HDD 1 Temperature |
< |
60 |
|
NAS |
HDD 2 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 2 Status |
= |
0 (ready) |
|
NAS |
HDD 2 Temperature |
< |
60 |
|
NAS |
HDD 3 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 3 Status |
= |
0 (ready) |
|
NAS |
HDD 3 Temperature |
< |
60 |
|
NAS |
HDD 4 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 4 Status |
= |
0 (ready) |
|
NAS |
HDD 4 Temperature |
< |
60 |
|
NAS |
HDD 5 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 5 Status |
= |
0 (ready) |
|
NAS |
HDD 5 Temperature |
< |
60 |
|
NAS |
HDD 6 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 6 Status |
= |
0 (ready) |
|
NAS |
HDD 6 Temperature |
< |
60 |
|
NAS |
HDD 7 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 7 Status |
= |
0 (ready) |
|
NAS |
HDD 7 Temperature |
< |
60 |
|
NAS |
HDD 8 SMART Status (GOOD) |
= |
GOOD |
|
NAS |
HDD 8 Status |
= |
0 (ready) |
|
NAS |
HDD 8 Temperature |
< |
60 |
|
NAS |
System CPU usage |
< |
90% |
|
NAS |
System Temperature |
< |
60 |
|
SonicWALL |
||||
SonicWALL Firewall |
CPU Utilization in percent |
< |
50 |
|
SonicWALL Firewall |
Number of active connection cache entries through the firewall |
< |
5000 |
|
SonicWALL Firewall |
RAM Utilization in percent |
< |
50 |
|
Synology |
||||
NAS |
Disk 0 Status |
= |
1 (normal) |
|
NAS |
Disk 0 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 1 Status |
= |
1 |
|
NAS |
Disk 1 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 2 Status |
= |
1 |
|
NAS |
Disk 2 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 3 Status |
= |
1 |
|
NAS |
Disk 3 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 4 Status |
= |
1 |
|
NAS |
Disk 4 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 5 Status |
= |
1 |
|
NAS |
Disk 5 Temperature (Celsius) |
< |
60 |
|
NAS |
Disk 6 Status |
= |
1 |
|
NAS |
Disk 6 Temperature (Celsius) |
< |
60 |
|
NAS |
Synology CPU Fan status |
= |
1 (normal) |
|
NAS |
Synology Power Status |
= |
1 (normal) |
|
NAS |
Synology System Fan Status |
= |
1 (normal) |
|
NAS |
Synology System Status |
= |
1 (ok) |
|
NAS |
Synology System Temperature (Celsius) |
< |
36 |
|
RAID |
RAID 0 Status |
= |
1 (normal) |
|
RAID |
RAID 1 Status |
= |
1 (normal) |
|
RAID |
RAID 2 Status |
= |
1 (normal) |
|
RAID |
RAID 3 Status |
= |
1 (normal) |
|
RAID |
RAID 4 Status |
= |
1 (normal) |
|
WatchGuard Technologies * |
||||
XTM |
CPU Utilization last 1 minute - measured in 0.01% |
< |
9000 |
|
XTM |
CPU Utilization last 15 minutes - measured in 0.01% |
< |
9000 |
|
XTM |
CPU Utilization last 5 minutes - measured in 0.01% |
< |
9000 |
|
XTM |
CPU Utilization last 5 seconds - measured in 0.01% |
< |
9000 |
|
XTM |
System Current Active Connections |
>= |
0 |
|
XTM |
System Total Received Bytes |
>= |
0 |
|
XTM |
System Total Received Packets |
>= |
0 |
|
XTM |
System Total Send Bytes |
>= |
0 |
|
XTM |
System Total Send Packets |
>= |
0 |
|
XTM |
System Total Stream Requests |
>= |
0 |
|
XTM |
System Total Stream Requests Dropped |
>= |
0 |
|
* Please note to more accurately reflect the vendor, WatchGuard was moved from HP to its own WatchGuard Technologies section. |