HP ProCurve Sensor Status Check
The HP ProCurve Sensor Status Check uses SNMP to monitor the sensor status on an HP ProCurve switch.
Basic Check information
| Supported Systems/Application |
SNMP-enabled devices that support HP’s STATISTICS-MIB |
| Supported Device Class |
Switch |
Troubleshooting
| Failed |
Please check that the correct SNMP community string is configured in Network Discovery for the device. |
| 201 Exception
OID_TYPE_NOSUCHOBJECT |
Missing OID object on the device for specific metric |
Metrics
| Status |
Normal: 4 Failed: 1, 2, 3, 5 |
| Status Description |
No thresholds |
| Number of Times the Sensor Has
Reported a Warning State |
No thresholds |
| Number of Times the Sensor Has
Reported a FailedState |
No thresholds |
SNMP Properties Queried
| TargetValue |
1.3.6.1.4.1.11.2.14.11.1.2.6.1.7 |
| Status |
1.3.6.1.4.1.11.2.14.11.1.2.6.1.4 |
| WarningsCount |
1.3.6.1.4.1.11.2.14.11.1.2.6.1.5 |
| FailuresCount |
1.3.6.1.4.1.11.2.14.11.1.2.6.1.6 |
Calculations Performed
| Status Description |
Status mapped to: 1 - Unknown 2 - Bad 3 - Warning 4 - Good 5 - Not Present
|
| Number of Times the Sensor
Has Reported a Warning State |
WarningsCount |
| Number of Times the Sensor
Has Reported a Failed State |
FailuresCount |
