Server Temp (HP) service

The Server Temp (HP) service monitors the overall condition of the thermal environment on an HP ProLiant server.

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the N-able N-central Agent and the N-able N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.
Service TypeSNMP
Instances on a Device1
Supported Systems/ApplicationsHP Proliant Servers running HP Insight Manager 5.1 and later agents.
Device ClassServer - Generic, Other, Printer, Scanner/Camera, Switch/Router, and Server - Windows
Monitored ByWindows probes
Scan Interval15 minutes

OID/Calculation

Metric NameOID/CalculationDescription
Server Temp (HP)1.3.6.1.4.1.232.6.2.6.1

The status of the thermal environment is mapped as...

  • Normal: 1, 2
  • Warning: 3
  • Failed: 4

... where ...

  • 1: Other
  • 2: OK
  • 3: Degraded
  • 4: Failed