RAID Status (HP) service

The RAID Status (HP) service monitors the overall status of a RAID array on an HP/ProLiant server.

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the N-able N-central Agent and the N-able N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.

 

Service TypeSNMP
Instances on a Device1
Supported Systems/ApplicationsHP Proliant Servers running HP Insight Manager 5.1 and later agents.
Device ClassServer - Generic and Server - Windows
Monitored ByWindows probes
Scan Interval15 minutes

OID/Calculation

Metric NameOID/CalculationDescription
RAID Status (HP)1.3.6.1.4.1.232.3.1.3

The overall condition status of the disk array is mapped as...

  • Normal = 2
  • Warning = 1
  • Failed = 3, 4

... where ...

  • 1 = Other
  • 2 = OK
  • 3 = Failed
  • 4 = Predictive Failure