Power Supply (HP) service

The Power Supply (HP) service monitors the overall condition of the power supply for HP ProLiant servers.

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the N-able N-central Agent and the N-able N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.
Service Type:SNMP
Instances on a Device1
Supported Systems/ApplicationsHP Proliant Servers running HP Insight Manager 5.1 agents.
Device ClassServer - Generic, Workstation - Generic, Other, Printer, Scanner/Camera, Switch/Router, and Server - Windows
Monitored ByWindows probes
Scan Interval15 minutes

OID/Calculation

Metric NameOID/CalculationDescription
Power Supply (HP).1.3.6.1.4.1.232.6.2.9.1

The status of the power supply is mapped as...

  • Normal: 2
  • Warning: 1, 3
  • Failed: 4

... where ...

  • 1: Other
  • 2: OK
  • 3: Degraded
  • 4: Failed