Logical Drive (Adaptec) service

The Logical Drive (Adaptec) service monitors the status of the specified logical drive on an Adaptec RAID controller.

You need to install Adaptec Storage Manager or IBM ServeRAID Manager on the machine that you would like to monitor. For a complete list of supported models, see:

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the N-able N-central Agent and the N-able N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.
Service TypeSNMP
Instances on a Device10
Supported Systems/ApplicationsAny device using an Adaptec HostRAID card or an IBM ServeRAID card.
Device ClassServer - Generic and Server - Windows
Monitored ByWindows probes
Scan Interval5 minutes
Logical Drive

The name of the monitored logical drive.

You can obtain the name by querying the device with the .1.3.6.1.4.1.795.14.1.1000.1.1.2 SNMP OID.

OID/Calculation

Metric NameOID/CalculationDescription
Logical Drive State1.3.6.1.4.1.795.14.1.1000.1.1.7

Logical Drive State is mapped as:

  • Normal: 3
  • Warning: 1,2,4,5,6,8
  • Failed: 7

The meanings for each of the possible drive states:

  • 1: Unknown
  • 2: Other
  • 3: Optimal
  • 4: QuickInited
  • 5: Impacted
  • 6: Degraded
  • 7: Failed
  • 8: Compacted
Logical Drive State Description1.3.6.1.4.1.795.14.1.1000.1.1.7

The current health of the logical drive as:

  • Unknown
  • Other
  • Optimal
  • QuickInited
  • Impacted
  • Degraded
  • Failed
  • Compacted
RAID Level1.3.6.1.4.1.795.14.1.1000.1.1.4The RAID level used by this array.
Task1.3.6.1.4.1.795.14.1.1000.1.1.6

Task is mapped as:

  • Normal: 3
  • Warning: 1,2,4,5,6,7,8,9,10,11,12

The meanings for each of the possible mappings:

  • 1: Unknown
  • 2: Other
  • 3: No Task Active
  • 4: Reconstruct
  • 5: Zero Initialize
  • 6: Verify
  • 7: Verify With Fix
  • 8: Modification
  • 9: Copyback
  • 10: Compaction
  • 11: Expansion
  • 12: Snapshot Backup
Task Description1.3.6.1.4.1.795.14.1.1000.1.1.6

The task status of the logical drive as:

  • Unknown
  • Other
  • No Task Active
  • Reconstruct
  • Zero Initialize
  • Verify
  • verify With Fix
  • Modification
  • Copyback
  • Compaction
  • Expansion
  • Snapshot Backup
Task Completion1.3.6.1.4.1.795.14.1.1000.1.1.7

Task is mapped as:

  • Normal: 3
  • Warning: 1,2,4,5,6,7,8,9,10,11,12

The meanings for each of the possible mappings:

  • 1: Unknown
  • 2: Other
  • 3: No Task Active
  • 4: Reconstruct
  • 5: Zero Initialize
  • 6: Verify
  • 7: Verify With Fix
  • 8: Modification
  • 9: Copyback
  • 10: Compaction
  • 11: Expansion
  • 12: Snapshot Backup