Physical Drive (Fujitsu) service

The Physical Drive (Fujitsu) service monitors various elements related to the status of a Physical Drive in a Fujitsu device.

Service TypeSNMP
Instances on a Device100
Supported Systems/ApplicationsFujitsu servers running the Fujitsu ServerView agent.
Device Class for CPU (SNMP)Servers - Generic or Servers - Windows
Monitored ByWindows agent
Physical DriveEnter the name of the monitored physical drive. For a list of physical drives, query the device with the .1.3.6.1.4.1.231.2.49.1.5.2.1.24 SNMP OID.
ScanningYou can configure the scan interval according to either a Once a Day or Daily Interval schedule.

 

Object DescriptorsNumerical OID
$Status1.3.6.1.4.1.231.2.49.1.5.2.1.15
$SMARTStatus1.3.6.1.4.1.231.2.49.1.5.2.1.14
$BadBlocks1.3.6.1.4.1.231.2.49.1.5.2.1.13
$DeviceErrors1.3.6.1.4.1.231.2.49.1.5.2.1.12
$PowerStatus1.3.6.1.4.1.231.2.49.1.5.2.1.25
$Vendor1.3.6.1.4.1.231.2.49.1.5.2.1.6
$Model1.3.6.1.4.1.231.2.49.1.5.2.1.5
$SerialNumber1.3.6.1.4.1.231.2.49.1.5.2.1.17
$Capacity1.3.6.1.4.1.231.2.49.1.5.2.1.7
$DiskConnectionInterface1.3.6.1.4.1.231.2.49.1.5.2.1.11
$FirmwareVersion1.3.6.1.4.1.231.2.49.1.5.2.1.16
$MaxTransferRate1.3.6.1.4.1.231.2.49.1.5.2.1.8

 

Status DetailDescription
Status

Describes the current status of the monitored physical drive with values mapped as:

  1. WARNING - Unknown
  2. NORMAL - No Disk
  3. NORMAL - Online
  4. NORMAL - Ready
  5. FAILED - Failed
  6. WARNING - Rebuilding
  7. NORMAL - Global Hot Spare
  8. NORMAL - Dedicated Hot Spare
  9. FAILED - Offline
  10. FAILED - Failed Unconfigured
  11. WARNING - Formatting
  12. FAILED - Dead
S.M.A.R.T. Status

Describes the current S.M.A.R.T. status of the monitored physical drive with values mapped as:

  1. NORMAL - OK
  2. FAILED - Failure Predicted
  3. NORMAL - S.M.A.R.T. Not Available
  4. WARNING - S.M.A.R.T. Monitoring Disabled
Bad BlocksThe number of bad blocks on the monitored physical drive that cannot be reliably used for storing and retrieving data.
Read/Write/Seek ErrorsThe total combined number of read, write, and seek errors on the monitored physical drive.
Power Status

Describes the current status of the power supply for the monitored physical drive with values mapped as:

  1. Device is Active
  2. Device is Powered Down
  3. Device Has Changed its Power Status
ManufacturerThe manufacturer of the monitored physical drive.
ModelThe model name of the monitored physical drive.
Serial NumberThe serial number of the monitored physical drive.
CapacityThe total capacity of the monitored physical drive measured in Gigabytes.
Disk Interface The type of interface of the monitored physical drive, for example, IDE, SCSI, or SAS.
Firmware VersionThe version number of the firmware that is running on the monitored physical drive.
Maximum Disk Transfer RateThe maximum speed measured in bytes per second, of data transfer of the monitored physical drive .