CPU (Cisco) service
When this service has a scan interval of less than 5 minutes, the agent may take longer than the scan interval to gather the metrics. As a result, you may notice some scan intervals are not populated.
The CPU (Cisco) service monitors the CPU usage on Cisco devices that support CISCO-PROCESS-MIB. For information on other CPU services, see CPU service (local API, SNMP, WMI).
This service cannot use Self Healing.
|Instances on a Device||32|
|Supported Systems/Applications||Any Cisco device that supports CISCO-PROCESS-MIB.|
|Device Class for CPU (SNMP)||Switch/Router|
|Monitored By||Windows probes|
|Scan Interval||15 minutes|
|Minimum Scan Interval||1 minute|
|CPU Index||The SNMP index of the CPU, which is determined by performing an SNMP walk on cpmCPUTotal5sec (18.104.22.168.22.214.171.124.126.96.36.199.1.6).|
|% CPU Utilization (5 Seconds)||188.8.131.52.184.108.40.206.220.127.116.11.1.6||How busy the CPU was over the last five seconds as a percentage of its capacity.|
|% CPU Utilization (1 Minute)||18.104.22.168.22.214.171.124.126.96.36.199.1.7||How busy the CPU was over the last one minute as a percentage of its capacity.|
|% CPU Utilization (5 Minutes)||188.8.131.52.184.108.40.206.220.127.116.11.1.8||How busy the CPU was over the last five minutes as a percentage of its capacity.|